North KB Twintip Accessory Kit Black

Our Toolless InterLoops come in four sizes for different disciplines. The short freeride loop gives smaller riders a longer reach. Switch effortlessly between disciplines with our patented modular harness loop exchange system - no tools required. For secondary safety, a flexible LockGuard safety ring with pull tab secures the loop connection and prevents accidental loosening of your InterLoop. Made of optimized TPU material for flexibility and durability.

Longer leash for unhooked riding. Raising the bar for safety and comfort, our HandlePass leash features a soft neoprene cover, non-chafing elastic webbing and heavy-duty 316 stainless steel carabiners. The leash's quick-release mechanism with optimized pin length was modified in 2021 to ensure that proper alignment is maintained when the leash is released for smooth, safe release and reload.

32 x 200 mm / UV resistant, Die cut vinyl sticker x 25

Set of 5 double and 15 single discs for asymmetric and standard free surf bands

700 x 381 mm / UV resistant, Die cut vinyl vehicle sticker x 4

M6 x 18 mm screws are for the Sense Foilboard footstraps

Get off to a safe start in flight with our stable yet responsive 3-line trainer kite. The North Pioneer teaches the basics of kite flying in 5 to 20 knots of wind, allowing you to confidently master the fundamentals of kite control and power management before hitting the water. The 3-liner design allows for easy one-handed relaunch - ideal for solo or group use. Whether you're just starting out or it's time to teach your friends and family, you'll enjoy the attention to detail our designers have put into the Pioneer - making learning to fly a breeze.

The ideal mast height for prone foil surfing, learning to hang glide or foiling in shallow waters. Precision CNC machined from 6061-T6 anodized aerospace aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Classic cap with snap closure in black with round North logo

Black 6 piece face cap with logo badge

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Retro style trucker cap with black North logo and mesh back.

800 x 130 mm / UV resistant, Die cut vinyl vehicle sticker x 4

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

Stow your sonar quiver safely between sessions in our 600D padded travel bag. Inside, it's roomy enough to store the complete sonar foil set, including all three wings and the three masts in their individual covers. The bag also has enough depth to leave the board adapter connected to the mast, so you can pack the foil faster. Equipped with straps, clips and interior pockets to secure contents. Your worry-free travel companion. Included with every complete foil edition.

Classic snapback cap in navy blue with black badge and black mesh inserts

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Set of 4 North and N logo stickers 81.7 x 150 mm / UV resistant, Die cut vinyl sticker

Knitted hat with COOLMAX® mesh lining to keep you warm and dry.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Black Peak Cap with Black Sand Stick Logo

8m + 2m Dyneema line extensions for those who want custom 18m or 20m lines for wave riding or tighter kite loops. The Navigator Control System comes with 22m lines, with a split at 12m, which is far enough that the bar is far enough away to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil racing.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR locking cam and a set screw

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

TwinTip M6x16mm hardware screws are standardized for all TwinTip accessories. This package contains 50 replacement screws suitable for TwinTip Fins, Board Handles, Flex Bindings and Fix Wake Boots.