North KB Focus Hybrid TT Board Aqua

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Set of 5 double and 15 single discs for asymmetric and standard free surf bands

Our 70cm mast modular sonar foil system provides you with the ideal mast, hull and stabilizer for foil flying, learning to hang glide or foiling in shallow waters. Designed to last, with an exceptional strength-to-weight ratio and our unique GeoLock system for a clean, direct feel with minimal drag on the water. Ride with comfort and control using the fully interchangeable Sonar Foil System to extend your playtime on the water. Simply choose the Sonar Front Wing that best fits your needs to complete your setup (Sonar Front Wing, Foil Board and Foil and Board mounting hardware sold separately).

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

All parts of the modular sonar foil system are assembled with Torx T40 screws. We recommend applying a small amount of the marine grade grease provided in the tool kit to the threads and underside of the heads of the screws before assembling your foil (make sure all surfaces are free of dirt or sand before assembly). This Torx T40 screwdriver and marine grease tool kit is included with the complete foil editions. We do not recommend the use of power tools for foil assembly as they may cause damage (as torque and power control is limited) and will void your warranty.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Composite washers protect the deck of the plank and are designed to fit on bolt heads for a clean, seamless appearance. They are also sized so that they are not easily lost during disassembly.

Stow your sonar quiver safely between sessions in our 600D padded travel bag. Inside, it's roomy enough to store the complete sonar foil set, including all three wings and the three masts in their individual covers. The bag also has enough depth to leave the board adapter connected to the mast, so you can pack the foil faster. Equipped with straps, clips and interior pockets to secure contents. Your worry-free travel companion. Included with every complete foil edition.

81 x 150 mm / UV resistant, Die cut vinyl sticker x 25

Our patented quick-release system with intuitive, easy-to-use reloading raises the bar for control system safety. All loaded or running surfaces feature highly polished 316 stainless steel components and low-friction, coefficient materials for fast, safe releases under a wide range of conditions. QR handle designed to fit comfortably in your hand for industry standard push away triggering.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

NEW 6m replacement line set. Liros Dyneema SK99 lines of the highest quality.

Black crest cap with north green embroidery logo

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

32 x 200 mm / UV resistant, Die cut vinyl sticker x 25

Set of 10 HyperFlow snapshots

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR locking cam and a set screw

The Sonar foiling system is connected to the board by a lightweight, CNC-machined aluminum board adapter with tapered geometry that engages the mast. The board adapter and mast are fused together to create a bond for optimal load transfer and a stronger, more direct feel and steering impulse during foiling.

1000 x 545 mm / UV resistant, Die cut vinyl vehicle sticker x 4

North green long logo on black. Self adhesive vinyl sticker with bottom cover film. 100cm x 22cm.

Classic snapback cap in navy blue with black badge and black mesh inserts

Knitted hat with COOLMAX® mesh lining to keep you warm and dry.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

81 x 150 mm / UV resistant, Die cut vinyl sticker x 25

The ideal mast height for prone foil surfing, learning to hang glide or foiling in shallow waters. Precision CNC machined from 6061-T6 anodized aerospace aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.

Set of 4 North and N logo stickers 81.7 x 150 mm / UV resistant, Die cut vinyl sticker

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Retro style trucker cap with black North logo and mesh back.