Kneadable putty epoxy compound especially for the quick repair of surfboards, kiteboards and windsurf boards. Can also be applied wet and under water. Forms a firm bond after just 20 minutes and can be used on the water again. Fully resilient after 3 hours curing time. After surfing or on vacation, you can then sand and repair at your leisure.
Application:
1. Clean the surface
2. Remove the film
3. Cut off a piece
4. Knead the putty - don't forget protective gloves
5. Touch up, repair, seal
6. Allow to harden and work on if necessary
Contents 56 grams
Made in Germany
Color: Grey
Safety instructions:
Contains epoxy compounds. May cause allergic reactions. Follow manufacturer's instructions.
Hazard statements: H315 causes skin irritation. H317 may cause an allergic skin reaction. H319 causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects.
Additional information: May cause damage to health. Further hazardous properties cannot be excluded.
Unfortunately there are no review yet. Be the first who rate this product.
