Xcel Axis X X2 Wetsuit 5/4mm Frontzip Men Graphite
The new Axis X X2 is equipped with our waterproof X2 front zipper and thus offers excellent thermal performance. The chest and back areas have been additionally offset by Smooth Skin neoprene to minimize the wind chill factor over a large area.
Thanks to the Thermo Lite inner lamination, the suit dries quickly and keeps the body warm from torso to feet. The Axis X is made of 100% Nanoprene Lite Japanese limestone neoprene. To minimize water ingress, the already externally sealed blind stitch seams have been additionally sealed from the inside with FusionX seam tape.
The Axis X features our waterproof X2 front zipper system and additional innovative seams and materials for very good thermal performance and excellent stretch. The Xcel Axis is also made from 100% Nanoprene Lite Japanse limestone neoprene.
From torso to feet, the water-repellent, lightweight and quick-drying ThermoLite inner lamination is processed. Bonded and internally sealed with Fusion X seam tape, the blind stitch seams keep the Axis X waterproof.
Thermo Dry Seam Tape
A very stretchy and durable inner tape seam that provides an even better seal against water and thus retains heat much better. The tape is either infrared patterned (Neos with TDC) or yellow (Neos without TDC).
S-Seal Technology
Durable, even more flexible outer seam, for an even better seal. The neoprene parts are "soldered" together, so to speak, to let even less water through.
Ultra-Stretch Neoprene
Comfortable, lightweight neoprene made with lightweight foam and dense fabric to absorb extra little water, last longer and provide maximum stretch.
Quick-Dry Lining
Fast drying, hydrophobic premium lining. Fast drying time to increase thermal performance. Quick-Dry Lining is made from recycled polyester fibers to ensure the most environmentally friendly production possible.
Glued Blinded Stitching
The neoprene panels are glued and then blind stitched. Blind stitched means that the needle does not completely penetrate the neoprene to keep even more water out. The seams are fully sealed to give you maximum stretch ability of the wetsuit.
DuraFlex Knee Panels
The comfortable knee pads protect your knees from abrasions and other injuries. They are very stretchy, so they don't interfere with your movements or restrict your freedom of movement.
X2 Front Entry
With the waterproof front entry system, the front zipper runs along the upper chest-shoulder area. The zipper flap, located on the right shoulder, keeps more water out. The inner Crossover Neck Entry features overlapping panels that stretch to allow extra wide entry into the Neo.
X2 Crossover NeckEntry
The overlapping inner front and back neck panels (under the zipper flap) expand to allow for extra wide, entry.
Xcel Magnetic Zip Closure
The innovative and quick-opening zipper features a double magnet on the zipper tab and attached zipper flap, which securely locks the zipper in place and provides easier and faster opening than traditional closures.
To increase your own safety in and on the water, every water sports enthusiast should equip themselves with a wetsuit. These not only protect you from abrasions, but also from sunburn, cold and much more, which could make you lose the joy of activities in and on the water.
Thanks to the Thermo Lite inner lamination, the suit dries quickly and keeps the body warm from torso to feet. The Axis X is made of 100% Nanoprene Lite Japanese limestone neoprene. To minimize water ingress, the already externally sealed blind stitch seams have been additionally sealed from the inside with FusionX seam tape.
The Axis X features our waterproof X2 front zipper system and additional innovative seams and materials for very good thermal performance and excellent stretch. The Xcel Axis is also made from 100% Nanoprene Lite Japanse limestone neoprene.
From torso to feet, the water-repellent, lightweight and quick-drying ThermoLite inner lamination is processed. Bonded and internally sealed with Fusion X seam tape, the blind stitch seams keep the Axis X waterproof.
Features
- X2 front zipper system
- Crossover Neck Entry
- Thermo Lite inner lamination
- Nanoprene Lite Japanese Limestone Neoprene
- Texture Skin
- Fusion X Seam Tape
- S-Seal
- Water based adhesive
- Bonded blindstitch seams
- DuraFlex Knee Panels
- Fewer seams = More stretch
Thermo Dry Seam Tape
A very stretchy and durable inner tape seam that provides an even better seal against water and thus retains heat much better. The tape is either infrared patterned (Neos with TDC) or yellow (Neos without TDC).
S-Seal Technology
Durable, even more flexible outer seam, for an even better seal. The neoprene parts are "soldered" together, so to speak, to let even less water through.
Ultra-Stretch Neoprene
Comfortable, lightweight neoprene made with lightweight foam and dense fabric to absorb extra little water, last longer and provide maximum stretch.
Quick-Dry Lining
Fast drying, hydrophobic premium lining. Fast drying time to increase thermal performance. Quick-Dry Lining is made from recycled polyester fibers to ensure the most environmentally friendly production possible.
Glued Blinded Stitching
The neoprene panels are glued and then blind stitched. Blind stitched means that the needle does not completely penetrate the neoprene to keep even more water out. The seams are fully sealed to give you maximum stretch ability of the wetsuit.
DuraFlex Knee Panels
The comfortable knee pads protect your knees from abrasions and other injuries. They are very stretchy, so they don't interfere with your movements or restrict your freedom of movement.
X2 Front Entry
With the waterproof front entry system, the front zipper runs along the upper chest-shoulder area. The zipper flap, located on the right shoulder, keeps more water out. The inner Crossover Neck Entry features overlapping panels that stretch to allow extra wide entry into the Neo.
X2 Crossover NeckEntry
The overlapping inner front and back neck panels (under the zipper flap) expand to allow for extra wide, entry.
Xcel Magnetic Zip Closure
The innovative and quick-opening zipper features a double magnet on the zipper tab and attached zipper flap, which securely locks the zipper in place and provides easier and faster opening than traditional closures.
To increase your own safety in and on the water, every water sports enthusiast should equip themselves with a wetsuit. These not only protect you from abrasions, but also from sunburn, cold and much more, which could make you lose the joy of activities in and on the water.
Get your Xcel wetsuit now, which offers you everything you need to perfect your water sports and be ideally protected at the same time!
To find the right size for your wetsuit, we recommend you to orientate yourself by the specifications of the manufacturer Xcel. With the help of the following size chart you will find your optimal fitting wetsuit.
If you are unsure how to measure your body, we have created a measurement guide for you. You can find these instructions in the tab "How do you measure correctly?".
If you are unsure how to measure your body, we have created a measurement guide for you. You can find these instructions in the tab "How do you measure correctly?".
Hint:
If your body measurements are between two sizes, we recommend that you choose the larger size.
However, you should make sure that the wetsuit always fits tightly to your body like a second skin. This prevents too much water from flowing through the wetsuit and heat from being lost. TAB:How do you measure correctly?
To make sure that you find your perfectly fitting wetsuit, we have created a small guide on how to measure your body measurements correctly. With the help of the measured values and the size chart, you will find your perfect wetsuit.
Hint:
If you don't have a tape measure at home, a string and a folding rule or ruler will also suffice to measure you correctly.
Often we are asked in which temperatures and weather conditions it is best to use which wetsuit with which neoprene thickness. We are also asked how neoprene shoes, neoprene gloves or neoprene caps should be used. In addition, we have created a rough guideline below, which are based on the information of the manufacturer Xcel.
We want to give you a short overview why you should clean your wetsuit regularly and thoroughly and how to clean it best
Besides the hygiene factor, regular care also has an effect on the durability of the neoprene. If you simply hang your wetsuit out to dry in the sun after a session on the water and don't rinse out the salt water and dirt thoroughly, the neoprene can quickly become brittle and cracked. In general, we advise you not to hang your neo directly in the sun
A little tip when putting on the wetsuit: Make sure your body is dry, then it will be much easier to put on. Neoprene sticks to wet skin.
When you have finished your session, you should rinse the wetsuit directly with clean water. Then turn it inside out and let it dry in a shady and airy place. When the wetsuit is dry, you can turn it inside out and hang it on a sturdy hanger
Attention: Do not use the spin cycle under any circumstances!
An alternative to the washing machine is the bathtub. Simply take a small bath with 30°C water temperature and add some detergent, shower gel or rinsing agent and let the wetsuit soak. Then rinse thoroughly again.
Small tip: There are also great neoprene cleaners, e.g. from Mystic.
Why should I clean my wetsuit?
Of course, regular and thorough cleaning of your wetsuit will improve hygiene. It is possible that in the worst case bacteria, mould or unpleasant odours can develop.Besides the hygiene factor, regular care also has an effect on the durability of the neoprene. If you simply hang your wetsuit out to dry in the sun after a session on the water and don't rinse out the salt water and dirt thoroughly, the neoprene can quickly become brittle and cracked. In general, we advise you not to hang your neo directly in the sun
How should I clean and care for my wetsuit?
Care begins with careful handling of the wetsuit. When putting on your wetsuit, you should not try to force your way into it, as this puts too much strain on the seams. Hectic and fast movements also put a lot of stress on the seams, so that they could tear.A little tip when putting on the wetsuit: Make sure your body is dry, then it will be much easier to put on. Neoprene sticks to wet skin.
When you have finished your session, you should rinse the wetsuit directly with clean water. Then turn it inside out and let it dry in a shady and airy place. When the wetsuit is dry, you can turn it inside out and hang it on a sturdy hanger
Can I wash my wetsuit in the washing machine?
Yes, that is no problem. Just turn it inside out and close the zipper. The wool programme or the gentle wash cycle at a maximum of 30°C is best. We recommend using a mild detergent. To remove any detergent residue, you can rinse again with water after the wash cycle.Attention: Do not use the spin cycle under any circumstances!
An alternative to the washing machine is the bathtub. Simply take a small bath with 30°C water temperature and add some detergent, shower gel or rinsing agent and let the wetsuit soak. Then rinse thoroughly again.
Small tip: There are also great neoprene cleaners, e.g. from Mystic.