North KB Bladder Leading Edge Carve Transparent

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR locking cam and a set screw

TwinTip M6x16mm hardware screws are standardized for all TwinTip accessories. This package contains 50 replacement screws suitable for TwinTip Fins, Board Handles, Flex Bindings and Fix Wake Boots.

Experience a complete connection with your board in total comfort with our high quality, lightweight, padded surf straps. Featuring our unique pre-stretched and laminated seamless NEW KnitFlex inner material. The Free Straps allow you to customize your fit and posture so you can move and spread freely in any situation.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Our Toolless InterLoops come in four sizes for different disciplines. The short freeride loop gives smaller riders a longer reach. Switch effortlessly between disciplines with our patented modular harness loop exchange system - no tools required. For secondary safety, a flexible LockGuard safety ring with pull tab secures the loop connection and prevents accidental loosening of your InterLoop. Made of optimized TPU material for flexibility and durability.

700 x 381 mm / UV resistant, Die cut vinyl vehicle sticker x 4

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

Classic cap with snap closure in black with round North logo

The 85cm mast is ideal for freeride foiling and tow surfing and increases overall ride performance in choppy conditions. This mast length is perfect for heeling more, flying the kite lower and further boosting the foil system for a more controlled ride at high speeds. Precision CNC machined from 6061-T6 anodized aerospace grade aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Set of 10 HyperFlow snapshots

Black crest cap with north green embroidery logo

Simple, clean and compact to hook onto, the standard size leash is included with all Navigator steering systems. Featuring high quality abrasion resistant elastic webbing and neoprene sleeve for rider comfort and durability, high grade 316 stainless steel carabiner and quick release buckle with optimized pin length for easier release. The NEW 2021 leash QR mechanism has been modified to ensure proper alignment is maintained during release for smooth, safe release and reload.

Get off to a safe start in flight with our stable yet responsive 3-line trainer kite. The North Pioneer teaches the basics of kite flying in 5 to 20 knots of wind, allowing you to confidently master the fundamentals of kite control and power management before hitting the water. The 3-liner design allows for easy one-handed relaunch - ideal for solo or group use. Whether you're just starting out or it's time to teach your friends and family, you'll enjoy the attention to detail our designers have put into the Pioneer - making learning to fly a breeze.

Black 6 piece face cap with logo badge

1200 x 195 mm / UV resistant, Die cut vinyl vehicle sticker x 4

Our patented quick-release system with intuitive, easy-to-use reloading raises the bar for control system safety. All loaded or running surfaces feature highly polished 316 stainless steel components and low-friction, coefficient materials for fast, safe releases under a wide range of conditions. QR handle designed to fit comfortably in your hand for industry standard push away triggering.

32 x 200 mm / UV resistant, Die cut vinyl sticker x 25

Knitted hat with COOLMAX® mesh lining to keep you warm and dry.

81 x 150 mm / UV resistant, Die cut vinyl sticker x 25

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Longer leash for unhooked riding. Raising the bar for safety and comfort, our HandlePass leash features a soft neoprene cover, non-chafing elastic webbing and heavy-duty 316 stainless steel carabiners. The leash's quick-release mechanism with optimized pin length was modified in 2021 to ensure that proper alignment is maintained when the leash is released for smooth, safe release and reload.

Retro style trucker cap with black North logo and mesh back.

8m + 2m Dyneema line extensions for those who want custom 18m or 20m lines for wave riding or tighter kite loops. The Navigator Control System comes with 22m lines, with a split at 12m, which is far enough that the bar is far enough away to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil racing.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

NEW 6m replacement line set. Liros Dyneema SK99 lines of the highest quality.

M6 x 18 mm screws are for the Sense Foilboard footstraps

Set of 4 North and N logo stickers 81.7 x 150 mm / UV resistant, Die cut vinyl sticker

Our patented quick-release system with intuitive, easy-to-use reloading raises the bar for control system safety. All loaded or running surfaces feature highly polished 316 stainless steel components and low-friction, coefficient materials for fast, safe releases under a wide range of conditions. QR handle designed to fit comfortably in your hand for industry standard push away triggering.