North KB Bridle set Carve Multicolor

1200 x 195 mm / UV resistant, Die cut vinyl vehicle sticker x 4

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Retro style trucker cap with black North logo and mesh back.

All parts of the modular sonar foil system are assembled with Torx T40 screws. We recommend applying a small amount of the marine grade grease provided in the tool kit to the threads and underside of the heads of the screws before assembling your foil (make sure all surfaces are free of dirt or sand before assembly). This Torx T40 screwdriver and marine grease tool kit is included with the complete foil editions. We do not recommend the use of power tools for foil assembly as they may cause damage (as torque and power control is limited) and will void your warranty.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

Self-tapping screws 6.3 x 22 m are suitable for all surfboard, scoop and chase foil board footstraps

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Composite washers protect the deck of the plank and are designed to fit on bolt heads for a clean, seamless appearance. They are also sized so that they are not easily lost during disassembly.

This package contains the bolts and nuts for attaching the sonarboard adapter to the scoop foil. This screw package is also supplied as standard with the North Scoop Foilboard.

The 85cm mast is ideal for freeride foiling and tow surfing and increases overall ride performance in choppy conditions. This mast length is perfect for heeling more, flying the kite lower and further boosting the foil system for a more controlled ride at high speeds. Precision CNC machined from 6061-T6 anodized aerospace grade aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Set of 4 North and N logo stickers 81.7 x 150 mm / UV resistant, Die cut vinyl sticker

Set of 5 double and 15 single discs for asymmetric and standard free surf bands

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

1000 x 545 mm / UV resistant, Die cut vinyl vehicle sticker x 4

Our patented quick-release system with intuitive, easy-to-use reloading raises the bar for control system safety. All loaded or running surfaces feature highly polished 316 stainless steel components and low-friction, coefficient materials for fast, safe releases under a wide range of conditions. QR handle designed to fit comfortably in your hand for industry standard push away triggering.

Get off to a safe start in flight with our stable yet responsive 3-line trainer kite. The North Pioneer teaches the basics of kite flying in 5 to 20 knots of wind, allowing you to confidently master the fundamentals of kite control and power management before hitting the water. The 3-liner design allows for easy one-handed relaunch - ideal for solo or group use. Whether you're just starting out or it's time to teach your friends and family, you'll enjoy the attention to detail our designers have put into the Pioneer - making learning to fly a breeze.

Experience a complete connection with your board in total comfort with our high quality, lightweight, padded surf straps. Featuring our unique pre-stretched and laminated seamless NEW KnitFlex inner material. The Free Straps allow you to customize your fit and posture so you can move and spread freely in any situation.

TwinTip M6x16mm hardware screws are standardized for all TwinTip accessories. This package contains 50 replacement screws suitable for TwinTip Fins, Board Handles, Flex Bindings and Fix Wake Boots.

Simple, clean and compact to hook onto, the standard size leash is included with all Navigator steering systems. Featuring high quality abrasion resistant elastic webbing and neoprene sleeve for rider comfort and durability, high grade 316 stainless steel carabiner and quick release buckle with optimized pin length for easier release. The NEW 2021 leash QR mechanism has been modified to ensure proper alignment is maintained during release for smooth, safe release and reload.

NEW 6m replacement line set. Liros Dyneema SK99 lines of the highest quality.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR locking cam and a set screw

Our fully customizable 85cm sonar mast design is suitable for all disciplines, giving you more headroom in clear waves or tighter turns. It's also more forgiving in rougher conditions. It's built to last, with an exceptional strength-to-weight ratio and our unique GeoLock system for a clean, direct ride with minimal drag on the water. Ride with comfort and control, and use the fully interchangeable sonar foil system to extend your playtime on the water. Simply choose the Sonar Front Wing that best fits your needs to complete your setup. (Sonar Front Wing, Foil Board, and Foil Board mounting hardware sold separately).

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

700 x 381 mm / UV resistant, Die cut vinyl vehicle sticker x 4

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

Classic cap with snap closure in black with round North logo

Our patented quick-release system with intuitive, easy-to-use reloading raises the bar for control system safety. All loaded or running surfaces feature highly polished 316 stainless steel components and low-friction, coefficient materials for fast, safe releases under a wide range of conditions. QR handle designed to fit comfortably in your hand for industry standard push away triggering.