North KB Front Wing Hull Black Sand

This package contains the bolts and nuts for attaching the sonarboard adapter to the scoop foil. This screw package is also supplied as standard with the North Scoop Foilboard.

800 x 130 mm / UV resistant, Die cut vinyl vehicle sticker x 4

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Our fully customizable 85cm sonar mast design is suitable for all disciplines, giving you more headroom in clear waves or tighter turns. It's also more forgiving in rougher conditions. It's built to last, with an exceptional strength-to-weight ratio and our unique GeoLock system for a clean, direct ride with minimal drag on the water. Ride with comfort and control, and use the fully interchangeable sonar foil system to extend your playtime on the water. Simply choose the Sonar Front Wing that best fits your needs to complete your setup. (Sonar Front Wing, Foil Board, and Foil Board mounting hardware sold separately).

Our Toolless Harness Loops come in four sizes for different disciplines, and the long Freestyle Loop is ideal for freestyle, unhooked and wakestyle riding (advanced riders only - no safety finger). Switch effortlessly between disciplines with our patented modular harness loop replacement system - no tools required. For secondary safety, a flexible LockGuard safety ring with pull tab secures the loop connection and prevents accidental loosening of your InterLoop. Made of optimized TPU material for flexibility and durability.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Experience a complete connection with your board in total comfort with our high quality, lightweight, padded surf straps. Featuring our unique pre-stretched and laminated seamless NEW KnitFlex inner material. The Free Straps allow you to customize your fit and posture so you can move and spread freely in any situation.

Classic snapback cap in navy blue with black badge and black mesh inserts

M6 x 18 mm screws are for the Sense Foilboard footstraps

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR locking cam and a set screw

All parts of the modular sonar foil system are assembled with Torx T40 screws. We recommend applying a small amount of the marine grade grease provided in the tool kit to the threads and underside of the heads of the screws before assembling your foil (make sure all surfaces are free of dirt or sand before assembly). This Torx T40 screwdriver and marine grease tool kit is included with the complete foil editions. We do not recommend the use of power tools for foil assembly as they may cause damage (as torque and power control is limited) and will void your warranty.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

The 85cm mast is ideal for freeride foiling and tow surfing and increases overall ride performance in choppy conditions. This mast length is perfect for heeling more, flying the kite lower and further boosting the foil system for a more controlled ride at high speeds. Precision CNC machined from 6061-T6 anodized aerospace grade aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.

Black Peak Cap with Black Sand Stick Logo

Set of 4 North and N logo stickers 81.7 x 150 mm / UV resistant, Die cut vinyl sticker

Knitted hat with COOLMAX® mesh lining to keep you warm and dry.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

Our Toolless InterLoops come in four sizes for different disciplines. The short freeride loop gives smaller riders a longer reach. Switch effortlessly between disciplines with our patented modular harness loop exchange system - no tools required. For secondary safety, a flexible LockGuard safety ring with pull tab secures the loop connection and prevents accidental loosening of your InterLoop. Made of optimized TPU material for flexibility and durability.

The ideal mast height for prone foil surfing, learning to hang glide or foiling in shallow waters. Precision CNC machined from 6061-T6 anodized aerospace aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

1200 x 195 mm / UV resistant, Die cut vinyl vehicle sticker x 4

Self-tapping screws 6.3 x 22 m are suitable for all surfboard, scoop and chase foil board footstraps

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Our patented quick-release system with intuitive, easy-to-use reloading raises the bar for control system safety. All loaded or running surfaces feature highly polished 316 stainless steel components and low-friction, coefficient materials for fast, safe releases under a wide range of conditions. QR handle designed to fit comfortably in your hand for industry standard push away triggering.

NEW 6m replacement line set. Liros Dyneema SK99 lines of the highest quality.

Stow your sonar quiver safely between sessions in our 600D padded travel bag. Inside, it's roomy enough to store the complete sonar foil set, including all three wings and the three masts in their individual covers. The bag also has enough depth to leave the board adapter connected to the mast, so you can pack the foil faster. Equipped with straps, clips and interior pockets to secure contents. Your worry-free travel companion. Included with every complete foil edition.

32 x 200 mm / UV resistant, Die cut vinyl sticker x 25

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.