North KB North Hexcel Coremat Finset Transparent

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Get off to a safe start in flight with our stable yet responsive 3-line trainer kite. The North Pioneer teaches the basics of kite flying in 5 to 20 knots of wind, allowing you to confidently master the fundamentals of kite control and power management before hitting the water. The 3-liner design allows for easy one-handed relaunch - ideal for solo or group use. Whether you're just starting out or it's time to teach your friends and family, you'll enjoy the attention to detail our designers have put into the Pioneer - making learning to fly a breeze.

Our fully customizable 85cm sonar mast design is suitable for all disciplines, giving you more headroom in clear waves or tighter turns. It's also more forgiving in rougher conditions. It's built to last, with an exceptional strength-to-weight ratio and our unique GeoLock system for a clean, direct ride with minimal drag on the water. Ride with comfort and control, and use the fully interchangeable sonar foil system to extend your playtime on the water. Simply choose the Sonar Front Wing that best fits your needs to complete your setup. (Sonar Front Wing, Foil Board, and Foil Board mounting hardware sold separately).

Composite washers protect the deck of the plank and are designed to fit on bolt heads for a clean, seamless appearance. They are also sized so that they are not easily lost during disassembly.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR locking cam and a set screw

1000 x 545 mm / UV resistant, Die cut vinyl vehicle sticker x 4

The ideal mast height for prone foil surfing, learning to hang glide or foiling in shallow waters. Precision CNC machined from 6061-T6 anodized aerospace aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Knitted hat with COOLMAX® mesh lining to keep you warm and dry.

Our patented quick-release system with intuitive, easy-to-use reloading raises the bar for control system safety. All loaded or running surfaces feature highly polished 316 stainless steel components and low-friction, coefficient materials for fast, safe releases under a wide range of conditions. QR handle designed to fit comfortably in your hand for industry standard push away triggering.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Our Toolless Harness Loops come in four sizes for different disciplines, and the long Freestyle Loop is ideal for freestyle, unhooked and wakestyle riding (advanced riders only - no safety finger). Switch effortlessly between disciplines with our patented modular harness loop replacement system - no tools required. For secondary safety, a flexible LockGuard safety ring with pull tab secures the loop connection and prevents accidental loosening of your InterLoop. Made of optimized TPU material for flexibility and durability.

Longer leash for unhooked riding. Raising the bar for safety and comfort, our HandlePass leash features a soft neoprene cover, non-chafing elastic webbing and heavy-duty 316 stainless steel carabiners. The leash's quick-release mechanism with optimized pin length was modified in 2021 to ensure that proper alignment is maintained when the leash is released for smooth, safe release and reload.

Set of 4 North and N logo stickers 81.7 x 150 mm / UV resistant, Die cut vinyl sticker

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

1200 x 195 mm / UV resistant, Die cut vinyl vehicle sticker x 4

700 x 381 mm / UV resistant, Die cut vinyl vehicle sticker x 4

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

NEW 6m replacement line set. Liros Dyneema SK99 lines of the highest quality.

The 85cm mast is ideal for freeride foiling and tow surfing and increases overall ride performance in choppy conditions. This mast length is perfect for heeling more, flying the kite lower and further boosting the foil system for a more controlled ride at high speeds. Precision CNC machined from 6061-T6 anodized aerospace grade aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.

Black crest cap with north green embroidery logo

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Black Peak Cap with Black Sand Stick Logo