North KB Quick Dry SS Tee Short Sleeve Men Black

Black Peak Cap with Black Sand Stick Logo

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Set of 5 double and 15 single discs for asymmetric and standard free surf bands

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR locking cam and a set screw

Retro style trucker cap with black North logo and mesh back.

32 x 200 mm / UV resistant, Die cut vinyl sticker x 25

Experience a complete connection with your board in total comfort with our high quality, lightweight, padded surf straps. Featuring our unique pre-stretched and laminated seamless NEW KnitFlex inner material. The Free Straps allow you to customize your fit and posture so you can move and spread freely in any situation.

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

NEW 6m replacement line set. Liros Dyneema SK99 lines of the highest quality.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

800 x 130 mm / UV resistant, Die cut vinyl vehicle sticker x 4

Knitted hat with COOLMAX® mesh lining to keep you warm and dry.

Composite washers protect the deck of the plank and are designed to fit on bolt heads for a clean, seamless appearance. They are also sized so that they are not easily lost during disassembly.

Classic cap with snap closure in black with round North logo

Set of 10 HyperFlow snapshots

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Black 6 piece face cap with logo badge

Our Toolless Harness Loops come in four sizes for different disciplines, and the Standard Freeride Loop (included with the control system) is suitable for all-terrain, freeride and freestyle riding. Switch effortlessly between disciplines with our patented modular harness loop replacement system - no tools required. For secondary security, a flexible LockGuard safety ring with pull tab secures the loop connection and prevents accidental loosening of your InterLoop. Made of optimized TPU material for flexibility and durability.

Our 70cm mast modular sonar foil system provides you with the ideal mast, hull and stabilizer for foil flying, learning to hang glide or foiling in shallow waters. Designed to last, with an exceptional strength-to-weight ratio and our unique GeoLock system for a clean, direct feel with minimal drag on the water. Ride with comfort and control using the fully interchangeable Sonar Foil System to extend your playtime on the water. Simply choose the Sonar Front Wing that best fits your needs to complete your setup (Sonar Front Wing, Foil Board and Foil and Board mounting hardware sold separately).

Longer leash for unhooked riding. Raising the bar for safety and comfort, our HandlePass leash features a soft neoprene cover, non-chafing elastic webbing and heavy-duty 316 stainless steel carabiners. The leash's quick-release mechanism with optimized pin length was modified in 2021 to ensure that proper alignment is maintained when the leash is released for smooth, safe release and reload.

All parts of the modular sonar foil system are assembled with Torx T40 screws. We recommend applying a small amount of the marine grade grease provided in the tool kit to the threads and underside of the heads of the screws before assembling your foil (make sure all surfaces are free of dirt or sand before assembly). This Torx T40 screwdriver and marine grease tool kit is included with the complete foil editions. We do not recommend the use of power tools for foil assembly as they may cause damage (as torque and power control is limited) and will void your warranty.

8m + 2m Dyneema line extensions for those who want custom 18m or 20m lines for wave riding or tighter kite loops. The Navigator Control System comes with 22m lines, with a split at 12m, which is far enough that the bar is far enough away to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil racing.

81 x 150 mm / UV resistant, Die cut vinyl sticker x 25

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR locking cam and a set screw

The 85cm mast is ideal for freeride foiling and tow surfing and increases overall ride performance in choppy conditions. This mast length is perfect for heeling more, flying the kite lower and further boosting the foil system for a more controlled ride at high speeds. Precision CNC machined from 6061-T6 anodized aerospace grade aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.