North KB Strut Replacement Bladders Transparent

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

32 x 200 mm / UV resistant, Die cut vinyl sticker x 25

All parts of the modular sonar foil system are assembled with Torx T40 screws. We recommend applying a small amount of the marine grade grease provided in the tool kit to the threads and underside of the heads of the screws before assembling your foil (make sure all surfaces are free of dirt or sand before assembly). This Torx T40 screwdriver and marine grease tool kit is included with the complete foil editions. We do not recommend the use of power tools for foil assembly as they may cause damage (as torque and power control is limited) and will void your warranty.

Stow your sonar quiver safely between sessions in our 600D padded travel bag. Inside, it's roomy enough to store the complete sonar foil set, including all three wings and the three masts in their individual covers. The bag also has enough depth to leave the board adapter connected to the mast, so you can pack the foil faster. Equipped with straps, clips and interior pockets to secure contents. Your worry-free travel companion. Included with every complete foil edition.

Retro style trucker cap with black North logo and mesh back.

Set of 10 HyperFlow snapshots

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Our Toolless InterLoops come in four sizes for different disciplines. The short freeride loop gives smaller riders a longer reach. Switch effortlessly between disciplines with our patented modular harness loop exchange system - no tools required. For secondary safety, a flexible LockGuard safety ring with pull tab secures the loop connection and prevents accidental loosening of your InterLoop. Made of optimized TPU material for flexibility and durability.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

1000 x 545 mm / UV resistant, Die cut vinyl vehicle sticker x 4

Our Toolless Harness Loops come in four sizes for different disciplines, and the Standard Freeride Loop (included with the control system) is suitable for all-terrain, freeride and freestyle riding. Switch effortlessly between disciplines with our patented modular harness loop replacement system - no tools required. For secondary security, a flexible LockGuard safety ring with pull tab secures the loop connection and prevents accidental loosening of your InterLoop. Made of optimized TPU material for flexibility and durability.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

M6 x 18 mm screws are for the Sense Foilboard footstraps

Composite washers protect the deck of the plank and are designed to fit on bolt heads for a clean, seamless appearance. They are also sized so that they are not easily lost during disassembly.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

700 x 381 mm / UV resistant, Die cut vinyl vehicle sticker x 4

8m + 2m Dyneema line extensions for those who want custom 18m or 20m lines for wave riding or tighter kite loops. The Navigator Control System comes with 22m lines, with a split at 12m, which is far enough that the bar is far enough away to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil racing.

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR latch cam and a set screw

Black Peak Cap with Black Sand Stick Logo

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

Set of 4 North and N logo stickers 81.7 x 150 mm / UV resistant, Die cut vinyl sticker

The assembled release mechanism includes a QR release pin, a release pin O-ring, a QR locking cam and a set screw

81 x 150 mm / UV resistant, Die cut vinyl sticker x 25

NEW 6m replacement line set. Liros Dyneema SK99 lines of the highest quality.

Our patented quick-release system with intuitive, easy-to-use reloading raises the bar for control system safety. All loaded or running surfaces feature highly polished 316 stainless steel components and low-friction, coefficient materials for fast, safe releases under a wide range of conditions. QR handle designed to fit comfortably in your hand for industry standard push away triggering.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

Experience a complete connection with your board in total comfort with our high quality, lightweight, padded surf straps. Featuring our unique pre-stretched and laminated seamless NEW KnitFlex inner material. The Free Straps allow you to customize your fit and posture so you can move and spread freely in any situation.

TwinTip M6x16mm hardware screws are standardized for all TwinTip accessories. This package contains 50 replacement screws suitable for TwinTip Fins, Board Handles, Flex Bindings and Fix Wake Boots.

Black crest cap with north green embroidery logo