North KB Bridle set Carve Multicolor

Our 70cm mast modular sonar foil system provides you with the ideal mast, hull and stabilizer for foil flying, learning to hang glide or foiling in shallow waters. Designed to last, with an exceptional strength-to-weight ratio and our unique GeoLock system for a clean, direct feel with minimal drag on the water. Ride with comfort and control using the fully interchangeable Sonar Foil System to extend your playtime on the water. Simply choose the Sonar Front Wing that best fits your needs to complete your setup (Sonar Front Wing, Foil Board and Foil and Board mounting hardware sold separately).

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Simple washers for symmetrical free foil bands

The ideal mast height for prone foil surfing, learning to hang glide or foiling in shallow waters. Precision CNC machined from 6061-T6 anodized aerospace aluminum for minimal drag, with structurally engineered joints for exceptional strength to weight ratio.

Experience a complete connection with your board in total comfort with our high quality, lightweight, padded surf straps. Featuring our unique pre-stretched and laminated seamless NEW KnitFlex inner material. The Free Straps allow you to customize your fit and posture so you can move and spread freely in any situation.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Set of 10 HyperFlow snapshots

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

Our fully customizable 85cm sonar mast design is suitable for all disciplines, giving you more headroom in clear waves or tighter turns. It's also more forgiving in rougher conditions. It's built to last, with an exceptional strength-to-weight ratio and our unique GeoLock system for a clean, direct ride with minimal drag on the water. Ride with comfort and control, and use the fully interchangeable sonar foil system to extend your playtime on the water. Simply choose the Sonar Front Wing that best fits your needs to complete your setup. (Sonar Front Wing, Foil Board, and Foil Board mounting hardware sold separately).

Our Toolless InterLoops come in four sizes for different disciplines. The short freeride loop gives smaller riders a longer reach. Switch effortlessly between disciplines with our patented modular harness loop exchange system - no tools required. For secondary safety, a flexible LockGuard safety ring with pull tab secures the loop connection and prevents accidental loosening of your InterLoop. Made of optimized TPU material for flexibility and durability.

Our patented quick-release system with intuitive, easy-to-use reloading raises the bar for control system safety. All loaded or running surfaces feature highly polished 316 stainless steel components and low-friction, coefficient materials for fast, safe releases under a wide range of conditions. QR handle designed to fit comfortably in your hand for industry standard push away triggering.

800 x 130 mm / UV resistant, Die cut vinyl vehicle sticker x 4

Classic cap with snap closure in black with round North logo

Longer leash for unhooked riding. Raising the bar for safety and comfort, our HandlePass leash features a soft neoprene cover, non-chafing elastic webbing and heavy-duty 316 stainless steel carabiners. The leash's quick-release mechanism with optimized pin length was modified in 2021 to ensure that proper alignment is maintained when the leash is released for smooth, safe release and reload.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

32 x 200 mm / UV resistant, Die cut vinyl sticker x 25

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

This package contains the bolts and nuts for attaching the sonarboard adapter to the scoop foil. This screw package is also supplied as standard with the North Scoop Foilboard.

Polished SS316 freestyle leash ring (as included with the HandlePass leash). The ring secures an unhooked rider to the bar, but prevents the kite from flagging out on the safety line when the rider releases the bar. Holds the leash carabiner up out of the way for effortless re-hooking. Once it's in reach, it's still easy to unhook.

8m + 2m Dyneema line extensions for those who want custom 18m or 20m lines for wave riding or tighter kite loops. The Navigator Control System comes with 22m lines, with a split at 12m, which is far enough that the bar is far enough away to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil racing.

This set contains the mounting screws for attaching the sonarboard adapter to the Sense Foilboard. This set of screws is also supplied as a standard accessory with the North Sense Foilboard.

NEW 6m replacement line set. Liros Dyneema SK99 lines of the highest quality.

12m + 10m Dyneema line extensions allow you to adjust your line length for wave riding or tighter kite loops. The Navigator Control System comes with 22m of lines, with a split at 12m, which is wide enough for the bar to travel far enough to fully depower our largest kite when you flag out. Remove the standard top line section of 10m and 12m lines are ideal for schools to teach with and foil races. Shorter 8m + 2m line extensions are also available as accessories if you need 18m or 20m lines for wave riding or tighter kite loops.

TwinTip M6x16mm hardware screws are standardized for all TwinTip accessories. This package contains 50 replacement screws suitable for TwinTip Fins, Board Handles, Flex Bindings and Fix Wake Boots.