Xcel Drylock Neoprene Boot Split Toe 3mm Black 2018
Everyone knows it - cold feet and fingers are very unconimous and hurt extremely, especially when "thaw". So that you can enjoy your session on the water and at least have no aching feet, we recommend you neoprene shoes.
The Xcel Drylock Neoprenboot Split Toe 3mm 2018 offers you everything you need for your session on the water. The neoprene shoe is equipped with the revolutionary and extremely warm Black TDC (Thermo Dry Celliant) lining. This ensures that body heat is converted into infrared energy by means of the mineralized Smart Fibers, which then warms you additionally. So you have warm feet even at temperatures of around 8°C. In addition, your feet recover faster.
The Drylock's Velcro fasteners are ergonomically attached and the seamless waterproofing in the ankle area ensures that no water flows into the shoe. Due to the curved fit, the Drylock is very comfortable to wear and the dressing and undressing is done quickly thanks to the strap on the heel. The Split Toe Design with the continuous "Single Rubber Bottom" sole ensures a perfect board feeling.
The seams are glued and not visible due to the "blind stitching" technology. In addition, the seams are additionally equipped with Taitex from the outside and the Thermo Dry Seam Tape from the inside to keep even more water out of the shoe.
TDC
Quick-drying, light and naturally water-repellent. TDC is Xcel's warmest lining ever - for any neoprene product. TDC is unique and only available on Xcel products. The clinically proven Smart Fibre technology converts your body heat into infrared energy and warms you even more. In addition, it ensures increased endurance and faster regeneration.
Drylock Ankle Sealing
The exclusive Xcel "Doughnut Sealing" or intention retains even more water and reduces flushing in the shoe. The fit of the intention also fits very well with all wetsuits.
Ultra-Stretch-Neoprene
Comfortable, lightweight neoprene made of light foam and dense fabric to absorb extra little water, last longer and ensure maximum elongation.
Glued Blinded Stitching
The neoprene panels are glued and then blindly sewn. Blind sewn means that the needle does not penetrate the neoprene completely, so that even more water is held. The seams are completely sealed and give you maximum stretch ability of the wetsuit. 
Strap for easy dressing and un-dressing
The strap is attached to the shoe by the "Pressure Bonding" to avoid unnecessary seams. With the help of the loop you can easily put your neoprene shoes on and off. 
Split Toe
Flexible and comfortable shoe design for even more freedom of movement and board feeling.
Order your Xcel neoprene shoes now to protect your feet from the cold and injuries!
The Xcel Drylock Neoprenboot Split Toe 3mm 2018 offers you everything you need for your session on the water. The neoprene shoe is equipped with the revolutionary and extremely warm Black TDC (Thermo Dry Celliant) lining. This ensures that body heat is converted into infrared energy by means of the mineralized Smart Fibers, which then warms you additionally. So you have warm feet even at temperatures of around 8°C. In addition, your feet recover faster.
The Drylock's Velcro fasteners are ergonomically attached and the seamless waterproofing in the ankle area ensures that no water flows into the shoe. Due to the curved fit, the Drylock is very comfortable to wear and the dressing and undressing is done quickly thanks to the strap on the heel. The Split Toe Design with the continuous "Single Rubber Bottom" sole ensures a perfect board feeling.
The seams are glued and not visible due to the "blind stitching" technology. In addition, the seams are additionally equipped with Taitex from the outside and the Thermo Dry Seam Tape from the inside to keep even more water out of the shoe.
Specifics
- 3mm Neoprene
- TDC - Infrared lining for even more heat
- "Single Rubber Bottom" sole and split toe for perfect board feeling
- Extremely durable and robust
- Glued "Blind-Stitched" Seams
- Seams additionally equipped with Taitex and Thermo Dry Seam Tape for longer durability
- Pleasantly warm feet at temperatures around 10°C
TDC
Quick-drying, light and naturally water-repellent. TDC is Xcel's warmest lining ever - for any neoprene product. TDC is unique and only available on Xcel products. The clinically proven Smart Fibre technology converts your body heat into infrared energy and warms you even more. In addition, it ensures increased endurance and faster regeneration.
Drylock Ankle Sealing
The exclusive Xcel "Doughnut Sealing" or intention retains even more water and reduces flushing in the shoe. The fit of the intention also fits very well with all wetsuits.
Ultra-Stretch-Neoprene
Comfortable, lightweight neoprene made of light foam and dense fabric to absorb extra little water, last longer and ensure maximum elongation.
Glued Blinded Stitching
The neoprene panels are glued and then blindly sewn. Blind sewn means that the needle does not penetrate the neoprene completely, so that even more water is held. The seams are completely sealed and give you maximum stretch ability of the wetsuit.
Strap for easy dressing and un-dressing
The strap is attached to the shoe by the "Pressure Bonding" to avoid unnecessary seams. With the help of the loop you can easily put your neoprene shoes on and off.
Split Toe
Flexible and comfortable shoe design for even more freedom of movement and board feeling.
Order your Xcel neoprene shoes now to protect your feet from the cold and injuries!
In order to find the right size for your neoprene shoes, we recommend that you follow the specifications of the manufacturer Xcel. With the help of the following size chart you will find your optimally matching neoprene shoes.
We are often asked at which temperatures and weather conditions it is best to use which wetsuit with which neoprene strength. We are also asked what it looks like with neoprene shoes, neoprene gloves or neoprene caps. For this purpose, we have subsequently created a rough guideline based on the specifications of the manufacturer Xcel.
We want to give you a brief overview of why you should clean your wetsuit and other neoprene parts such as wetgloves, shoes or hoods regularly and thoroughly and how best to clean it. These notes refer to wetsuits, but apply to all neoprene equipment.
In addition to the hygiene factor, regular care also has an effect on the durability of the neoprene. If you simply hang your wetsuit after a session on the water to dry in the sun and the salt water and dirt does not rinse thoroughly, the neoprene can quickly become brittle and cracked. Generally we advise against hanging the neo directly in the sun.
A little hint when putting on: Make sure that your body is dry, then it can be much easier to put on. Neoprene sticks to wet skin.
When you have finished your session, you should wash the Neo directly with clean water. Then turn it to the left and let it dry in a shady and airy place. When the neo is dry you can turn it over and hang it on a sturdy frame.
Attention: You must not use the spin cycle!
An alternative to the washing machine is the bathtub. Just take a small bath with 30 ° C water temperature and add some detergent, shower gel or Spüli and let soak the wetsuit. Then rinse thoroughly again.
A little hint: There are also great Neoprenreiniger example from Mystic
Why should I clean my wetsuit?
Of course, the regular and thorough cleaning of your wetsuit will improve your hygiene. It is possible that in the worst case, bacteria, mold or unpleasant odors form.In addition to the hygiene factor, regular care also has an effect on the durability of the neoprene. If you simply hang your wetsuit after a session on the water to dry in the sun and the salt water and dirt does not rinse thoroughly, the neoprene can quickly become brittle and cracked. Generally we advise against hanging the neo directly in the sun.
How should I cleanse and care for my wetsuit?
The care begins with a careful handling of the wetsuit. When putting on, you should not try to get into the wetsuit by force, as this puts too much strain on the seams. Even hectic and fast movements stress the seams so much that they could break.A little hint when putting on: Make sure that your body is dry, then it can be much easier to put on. Neoprene sticks to wet skin.
When you have finished your session, you should wash the Neo directly with clean water. Then turn it to the left and let it dry in a shady and airy place. When the neo is dry you can turn it over and hang it on a sturdy frame.
Can I wash my wetsuit in the washing machine?
Yes this is not a problem. Just turn it to the left and close the zipper. The best choice is either the wool program or the gentle cycle at a maximum of 30 ° C. As a detergent, we recommend mild detergent. To remove all detergent residues, you can rinse again after washing with water.Attention: You must not use the spin cycle!
An alternative to the washing machine is the bathtub. Just take a small bath with 30 ° C water temperature and add some detergent, shower gel or Spüli and let soak the wetsuit. Then rinse thoroughly again.
A little hint: There are also great Neoprenreiniger example from Mystic
