RSPro Cork Front Grip Deck
Super thin (1mm) surfboard front pad made of cork with best grip from sustainable material. Absorbs no water and protects the board from hits.The design fits the RsPro Hexagons if you want to combine both system.
These cool grip patches are a great alternative to the normal patches. You do something for the environment. The sustainable and energy efficient material is a great alternative. And it also looks really good on your board.
- Dimensions: 39x52 cm
- 4 parts with 9x41.3cm each
- Weight: 100 grams
- Suitable for all surfaces and surfing
- Waterproof
- Easy handling
- Made of cork
- Made in Barcelona
- Clean the board deck thoroughly with alcohol or similar. Make sure that there are no wax residues. Avoid industrial cleaners.
- Before you begin, set up the traction layout. PRO TIP: We recommend standing with the stand next to the board or standing with the older board to copy the front foot position.
- Use the stringer or mark the center of the board with a pencil.
- Start with the first middle section. Peel off the adhesive backing on one end and begin applying. PRO TIP: Press from the center to the edges or from side to side to release all air.
- Then apply the side pieces so there is an even gap on each side. PRO TIP: Use the HexaTraction spacer
- Peel off the white protective & application paper.
- Wait a few hours and go surfing
Unfortunately there are no review yet. Be the first who rate this product.