SOLAREZ Sponge Rez Bodyboard Repair 56g
Repair of bodyboards, soft surfboards and swim fins. Incredibly strong and tough. Repairs many materials except Styrofoam (EPS).
Sponge-Rez is a tough, clear, ultra-flexible resin designed to repair the most common types of damage to bodyboards. worn leash plugs, buckled bottoms, delaminated decks, holes or scratches, rash deck, foam deck of soft surfboards. Sponge-Rez can be used with all types of materials such as Ethafoam, Surlyn, EVA, Vinyl and Arcel, but melts Styrofoam (EPS).
Sponge-Rez also repairs cracked, weathered flippers.
General instructions:
- The surface must be clean, dry and free of dirt and/or wax.
- Use in a well-ventilated area, preferably outdoors. DO NOT intentionally inhale vapors - don't be silly.
- Apply generously to porous surfaces. Use a spreader to press Sponge-Rez into the damaged part of the board. Do not apply Sponge-Rez with your fingers.
- Sponge-Rez "skins" off in about 10-15 minutes. and feel dry in about 2 hours, but a full cure takes 24 hours - especially when filling deep grooves.
Content: 56 grams / 2 ounces
CAUTION: Not suitable for Styrofoam (EPS) boards!
Sponge-Rez is a tough, clear, ultra-flexible resin designed to repair the most common types of damage to bodyboards. worn leash plugs, buckled bottoms, delaminated decks, holes or scratches, rash deck, foam deck of soft surfboards. Sponge-Rez can be used with all types of materials such as Ethafoam, Surlyn, EVA, Vinyl and Arcel, but melts Styrofoam (EPS).
Sponge-Rez also repairs cracked, weathered flippers.
General instructions:
- The surface must be clean, dry and free of dirt and/or wax.
- Use in a well-ventilated area, preferably outdoors. DO NOT intentionally inhale vapors - don't be silly.
- Apply generously to porous surfaces. Use a spreader to press Sponge-Rez into the damaged part of the board. Do not apply Sponge-Rez with your fingers.
- Sponge-Rez "skins" off in about 10-15 minutes. and feel dry in about 2 hours, but a full cure takes 24 hours - especially when filling deep grooves.
Content: 56 grams / 2 ounces
CAUTION: Not suitable for Styrofoam (EPS) boards!
Unfortunately there are no review yet. Be the first who rate this product.