Surfboard TORQ Epoxy TEC PG-R 5.4
The PG-R is a surfboard that offers high performance, even in average waves.
For this Torq model, the DNA of the Comp was combined with that of the Summer 5 to create a board with which you get a lot of waves and generate high speed, even in weaker conditions.
At the same time, it still allows for the tightest turns and vertical surfing.
The PG-R has a low-entry rocker and offers ideal glide characteristics due to its width, with a concave running through the front, so that high speeds can be achieved even in medium waves.
From the middle to the tail, the outline runs into a classic shortboard squashtail. The sinlge-to-double underwater hull and vee in the fin area allows for easy rail-to-rail transitions.
The result is a fast accelerating board that perfectly transfers the generated speed into radical turns and airtime.
With the 5 Futures fin boxes, it can be surfed as a quad or a thruster.
5'4 x 20 1/8" x 2 3/8" - 29,15 Lit
Futures Fin Boxes
Included: Board without fins
TORQ TEC CONSTRUCTION IN DETAIL:
Torq Epoxy Composite offers versatile performance shapes in the most advanced epoxy construction.
A mix of traditional fiberglass layers and carbon fibers is used, making the boards ultra-light and -robust.
Leading Epoxy Technology
Using optimized composite construction methods, the TEC Range is one step ahead. Super stable, yet lightweight boards with perfect flex.
Control - Flex - Response
In the TORQ epoxy composite manufacturing, one layer each of 6oz and 4oz fiberglass and carbon reinforcements (in the tail and as stringers) are processed. The bottom is also reinforced with carbon in the tail area and also has a carbon strip that runs the entire length, giving the board controlled flex and lively response.
Unmatched Durability
Breakthrough TEC technology has been applied to create true high performance boards with unrivaled durability.
EPS Foam:
Lighter-Faster-Greener
Computerized blank manufacturing results in significantly less waste. No MDI or TDI. Far more environmentally friendly than traditional polyurethane blanks.
STABILITY AND LIGHTNESS
6oz and 4oz fiberglass and a 6oz deck patch provide more stability with less weight than traditional polyester boards.
CARBON FIBERS:
Stronger - More Lively
Provide the board with higher stretchability than fiberglass. More lively in maneuvers plus stronger in stressed region such as over the fins.
EPOXY RESIN:
Stronger - More environmentally friendly
Less release of toxic VOCs when cured. Stronger than polyester resin. No excess/waste in processing.
For this Torq model, the DNA of the Comp was combined with that of the Summer 5 to create a board with which you get a lot of waves and generate high speed, even in weaker conditions.
At the same time, it still allows for the tightest turns and vertical surfing.
The PG-R has a low-entry rocker and offers ideal glide characteristics due to its width, with a concave running through the front, so that high speeds can be achieved even in medium waves.
From the middle to the tail, the outline runs into a classic shortboard squashtail. The sinlge-to-double underwater hull and vee in the fin area allows for easy rail-to-rail transitions.
The result is a fast accelerating board that perfectly transfers the generated speed into radical turns and airtime.
With the 5 Futures fin boxes, it can be surfed as a quad or a thruster.
5'4 x 20 1/8" x 2 3/8" - 29,15 Lit
Futures Fin Boxes
Included: Board without fins
TORQ TEC CONSTRUCTION IN DETAIL:
Torq Epoxy Composite offers versatile performance shapes in the most advanced epoxy construction.
A mix of traditional fiberglass layers and carbon fibers is used, making the boards ultra-light and -robust.
Leading Epoxy Technology
Using optimized composite construction methods, the TEC Range is one step ahead. Super stable, yet lightweight boards with perfect flex.
Control - Flex - Response
In the TORQ epoxy composite manufacturing, one layer each of 6oz and 4oz fiberglass and carbon reinforcements (in the tail and as stringers) are processed. The bottom is also reinforced with carbon in the tail area and also has a carbon strip that runs the entire length, giving the board controlled flex and lively response.
Unmatched Durability
Breakthrough TEC technology has been applied to create true high performance boards with unrivaled durability.
EPS Foam:
Lighter-Faster-Greener
Computerized blank manufacturing results in significantly less waste. No MDI or TDI. Far more environmentally friendly than traditional polyurethane blanks.
STABILITY AND LIGHTNESS
6oz and 4oz fiberglass and a 6oz deck patch provide more stability with less weight than traditional polyester boards.
CARBON FIBERS:
Stronger - More Lively
Provide the board with higher stretchability than fiberglass. More lively in maneuvers plus stronger in stressed region such as over the fins.
EPOXY RESIN:
Stronger - More environmentally friendly
Less release of toxic VOCs when cured. Stronger than polyester resin. No excess/waste in processing.
Unfortunately there are no review yet. Be the first who rate this product.
