Surfboard TORQ TEC The Don NR 9.1 Noserider Moca

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 5.6 x 20 2/4 x 2 3/8 31,0 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'0 x 20 1/2? x 2 1/2? - 36,2 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'2 x 20 7/8? x 2 5/8? - 39,9 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'4 x 21 1/4? x 2 3/4? - 43,7 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'6 x 21 3/4? x 3? - 50 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'10 x 22 1/4? x 3 1/8? - 55,8 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

BIGBOY 23
Carton contents: Board without Fins

"I was smiling so much I got sunburnt teeth!?

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions: 6'6 x 21 3/4? x 2 3/4?
Volumen: 43.5 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY 23
Carton contents: Board without Fins

"I was smiling so much I got sunburnt teeth!?

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions : 6'10 x 22 1/2? x 2 7/8?
Volume: 49.1 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY 23
Carton contents: Board without Fins

"I was smiling so much I got sunburnt teeth!?

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions: 7'2 x 22 3/4? x 3?
Volume: 53.7 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY 23
Carton contents: Board without Fins

"I was smiling so much I got sunburnt teeth!?

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions: 7'6 x 23? x 3?
Volume: 57.5 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY 23
Carton contents: Board without Fins

"I was smiling so much I got sunburnt teeth!?

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions: 6'6 x 21 3/4? x 2 3/4?
Volumen: 43.5 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY 23
Carton contents: Board without Fins

"I was smiling so much I got sunburnt teeth!?

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions : 6'10 x 22 1/2? x 2 7/8?
Volume: 49.1 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY 23
Carton contents: Board without Fins

"I was smiling so much I got sunburnt teeth!?

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions: 7'2 x 22 3/4? x 3?
Volume: 53.7 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY 23
Carton contents: Board without Fins

"I was smiling so much I got sunburnt teeth!?

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions: 7'6 x 23? x 3?
Volume: 57.5 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY Fish
Scope of delivery:: Board without Fins

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.

Dimensions: 6'6 x 21 3/4? x 3? Volumen: 48.7 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY Fish
Scope of delivery:: Board without Fins

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.

Dimensions: 6'10 x 22 1/4? x 3 1/8? Volumen: 54,7 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY Fish
Scope of delivery:: Board without Fins

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.

Dimensions: 7'2 x 22 1/2? x 3 1/4? Volumen: 60,3 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY Fish
Scope of delivery:: Board without Fins

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.

Dimensions: 7'6 x 22 3/4? x 3 3/8? Volumen: 66,3 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

5'10 x 20 1/4? x 2 7/16? - 33,8 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

5'8 x 20? x 2 3/8? - 31,5 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

5'6 x 19 3/4? x 2 5/16? - 29,4 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 5.8 x 21 1/4 x 2 1/2 34,4 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 5.10 x 21 3/4 x 2 5/8 38,0 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 6.0 x 22 1/4 x 2 3/4 41,7 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 6.2 x 22 1/2 x 2 13/16 45,0 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 5.6 x 20 2/4 x 2 3/8 31,0 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 5.8 x 21 1/4 x 2 1/2 34,4 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 5.10 x 21 3/4 x 2 5/8 38,0 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 6.0 x 22 1/4 x 2 3/4 41,7 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Summer Fish

A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.

With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.
Dimensions: 6.2 x 22 1/2 x 2 13/16 45,0 ltr
Content: Board without fins

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

5'6 x 19 3/4? x 2 5/16? - 29,4 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

5'8 x 20? x 2 3/8? - 31,5 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

5'10 x 20 1/4? x 2 7/16? - 33,8 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'0 x 20 1/2? x 2 1/2? - 36,2 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'2 x 20 7/8? x 2 5/8? - 39,9 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'4 x 21 1/4? x 2 3/4? - 43,7 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'6 x 21 3/4? x 3? - 50 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

This modern Twin Fish is all about speed and flow.
A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.
To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.
Great for average to good waves of 2-4ft.

6'10 x 22 1/4? x 3 1/8? - 55,8 Lit

Content: Board without fins
2 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

BIGBOY Fish
Scope of delivery:: Board without Fins

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.

Dimensions: 6'6 x 21 3/4? x 3? Volumen: 48.7 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY Fish
Scope of delivery:: Board without Fins

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.

Dimensions: 6'10 x 22 1/4? x 3 1/8? Volumen: 54,7 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY Fish
Scope of delivery:: Board without Fins

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.

Dimensions: 7'2 x 22 1/2? x 3 1/4? Volumen: 60,3 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Cruise with power

The Chopper is a versatile shape – it's a cruisey ride when the conditions suit, but give it a big open face and it'll fire on all cylinders.

The clean lines of the outline and low rocker give this egg inspired shape a really smooth natural feel. In small waves it paddles, glides and trims with little effort. For surfers keen for larger surf, this'll get into waves early, hold a line in the barrel and draw long rail to rail arcs out on the face.

With the option of 2+1 fin boxes it can be ridden as single fin, or as 2+1.
6.10 x 20 3/4 x 2 5/8 42,6 Liter Volumen
Content: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Cruise with power

The Chopper is a versatile shape – it's a cruisey ride when the conditions suit, but give it a big open face and it'll fire on all cylinders.

The clean lines of the outline and low rocker give this egg inspired shape a really smooth natural feel. In small waves it paddles, glides and trims with little effort. For surfers keen for larger surf, this'll get into waves early, hold a line in the barrel and draw long rail to rail arcs out on the face.

With the option of 2+1 fin boxes it can be ridden as single fin, or 2+1.
7.2 x 21 1/4 x 2 3/4 47,5 Liter Volumen
Content: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Cruise with power

The Chopper is a versatile shape – it's a cruisey ride when the conditions suit, but give it a big open face and it'll fire on all cylinders.

The clean lines of the outline and low rocker give this egg inspired shape a really smooth natural feel. In small waves it paddles, glides and trims with little effort. For surfers keen for larger surf, this'll get into waves early, hold a line in the barrel and draw long rail to rail arcs out on the face.

With the option of 2+1 fin boxes it can be ridden as single fin, or as 2+1.
7.6 x 21 3/4 x 2 7/8 52,5 Liter Volumen
Content: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

8.6 x 22 1/4 x 2 5/8 - 57,9 Liter Vol
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

9'0 x 22 1/2? x 2 3/4? 64.7 ltr
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

9'6 x 22 3/4? x 2 7/8? 71.5 ltr
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

8.6 x 22 1/4 x 2 5/8 - 57,9 Liter Vol
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

9'0 x 22 1/2? x 2 3/4? 64.7 ltr
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

9'6 x 22 3/4? x 2 7/8? 71.5 ltr
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

8.6 x 23 1/4 x 3 3/8 - 74,7 ltr
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

9.0 x 23 1/2 x 3 1/2 - 81.8 ltr
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

9.6 x 23 3/4 x 3 5/8 - 90,7 Ltr
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

8.6 x 23 1/4 x 3 3/8 - 74,7 ltr
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Surfboard TORQ Epoxy TEC The Don 9.0 XL Malibu Longboard Noserider

.. FOR NOSE RIDING AND MANEUVERABILITY
A performance longboard that will suit waves of any kind.

Through the middle is a straight template and flatter rocker. Effortless paddling and glide for early wave catching and trim. Up at the front is a wide longboard nose with a single concave underneath, a soft rail and medium entry rocker. It's a combination made for solid, stable nose rides in addition to easy carving.

In the back 3rd, the template narrows into a pulled in round tail with a double concave vee in the bottom and a medium tail flip. Designed for maneuverability, this tail allows the board to come hard off the bottom into the lip or carve a long arc back into the pocket.

An allround performance longboard in cutting edge technology.

9.6 x 23 3/4 x 3 5/8 - 90,7 Ltr
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

THIS IS THE DELUXE SURFING EXPERIENCE.
Drawing on 60 years of classic longboard design the Horseshoe is a distinguished ride. It's the luxury ocean liner, it's first class all the way.

The low rocker, wide and straight outline and 50/50 rail are combined to create a board that trims effortlessly. The wide, single concaved nose is designed to generate lift creating ample nose riding stability. In the tail, the rocker lifts slightly through the last 12? and the fin cluster is positioned slightly forward, which makes this much easier to turn than a traditional heavy noserider.

If you are looking for a classic noserider, without the weight of a traditional board, that will trim and glide, noseride easily but still turn, then this is your ride.

9.0 x 22 7/8 x 3 - 71,4 Ltr
1x US Base Finbox

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Surfboard TORQ Epoxy TEC The Horseshoe 9.3 Malibu Longboard Noserider

Cruise with power

The Chopper is a versatile shape – it's a cruisey ride when the conditions suit, but give it a big open face and it'll fire on all cylinders.

The clean lines of the outline and low rocker give this egg inspired shape a really smooth natural feel. In small waves it paddles, glides and trims with little effort. For surfers keen for larger surf, this'll get into waves early, hold a line in the barrel and draw long rail to rail arcs out on the face.

With the option of 2+1 fin boxes it can be ridden as single fin, or as 2+1.
7.6 x 21 3/4 x 2 7/8 52,5 Liter Volumen
Content: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Cruise with power

The Chopper is a versatile shape – it's a cruisey ride when the conditions suit, but give it a big open face and it'll fire on all cylinders.

The clean lines of the outline and low rocker give this egg inspired shape a really smooth natural feel. In small waves it paddles, glides and trims with little effort. For surfers keen for larger surf, this'll get into waves early, hold a line in the barrel and draw long rail to rail arcs out on the face.

With the option of 2+1 fin boxes it can be ridden as single fin, or 2+1.
7.2 x 21 1/4 x 2 3/4 47,5 Liter Volumen
Content: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Cruise with power

The Chopper is a versatile shape – it's a cruisey ride when the conditions suit, but give it a big open face and it'll fire on all cylinders.

The clean lines of the outline and low rocker give this egg inspired shape a really smooth natural feel. In small waves it paddles, glides and trims with little effort. For surfers keen for larger surf, this'll get into waves early, hold a line in the barrel and draw long rail to rail arcs out on the face.

With the option of 2+1 fin boxes it can be ridden as single fin, or as 2+1.
6.10 x 20 3/4 x 2 5/8 42,6 Liter Volumen
Content: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

BIGBOY Fish
Scope of delivery:: Board without Fins

This is a wolf in sheep's clothing. The dark horse, charlatan, imposter. You think you're looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde.

On paper it's a funboard and if you're looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it's perfect for you. But in the hands of a seasoned surfer it'll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us "I was smiling so much I got sunburnt teeth!?.

For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.

With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.

Dimensions: 7'6 x 22 3/4? x 3 3/8? Volume: 66,3 Liter

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

M2 – Lightweight, mid-length performance

Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Usually a performance minimal comes at a cost; the size of the board means to make it lightweight they are inherently weak and lose their responsive feel quickly or simply break. With the Torq TEC construction you get a lightweight board with all the strength of a much heavier one and much more responsivity.

Our combination of carbon strips on the top and bottom make these boards super lively and surf a lot shorter than their length.

6.6 x 21 x 2 1/2 - 39 Liter
US Center Box + 4 Futures Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

M2 – Lightweight, mid-length performance

Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Usually a performance minimal comes at a cost; the size of the board means to make it lightweight they are inherently weak and lose their responsive feel quickly or simply break. With the Torq TEC construction you get a lightweight board with all the strength of a much heavier one and much more responsivity.

Our combination of carbon strips on the top and bottom make these boards super lively and surf a lot shorter than their length.

7'0 x 20 3/4? x 2 5/8? 43.3 ltr
5 Futures Finboxes, surf as a Thruster or as a Quad.

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

M2 – Lightweight, mid-length performance

Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Usually a performance minimal comes at a cost; the size of the board means to make it lightweight they are inherently weak and lose their responsive feel quickly or simply break. With the Torq TEC construction you get a lightweight board with all the strength of a much heavier one and much more responsivity.

Our combination of carbon strips on the top and bottom make these boards super lively and surf a lot shorter than their length.

6.6 x 21 x 2 1/2 - 39 Liter
US Center Box + 4 Futures Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

M2 – Lightweight, mid-length performance

Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Usually a performance minimal comes at a cost; the size of the board means to make it lightweight they are inherently weak and lose their responsive feel quickly or simply break. With the Torq TEC construction you get a lightweight board with all the strength of a much heavier one and much more responsivity.

Our combination of carbon strips on the top and bottom make these boards super lively and surf a lot shorter than their length.

7'0 x 20 3/4? x 2 5/8? 43.3 ltr
5 Futures Finboxes, surf as a Thruster or as a Quad.

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Our original M2 is the ultimate all rounder; big waves, small waves, novice or pro, anyone can have fun on this board in virtually any waves. It's a balanced design with a long easy paddling rocker and wide nose for wave catching, a foiled rail and pulled in tail for responsivity.

The M2V+ is a more user friendly variation with full volume and a straighter rail. This is more of a classic minimal with added volume for extra wave catching and float. The wider tail is more stable and gives forward speed generating in smaller waves. Great for new surfers or just a fun all round board.

7.0 x 21 1/2 x 2 7/8 - 49,5 Ltr

Content: Board without fins

LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Our original M2 is the ultimate all rounder; big waves, small waves, novice or pro, anyone can have fun on this board in virtually any waves. It's a balanced design with a long easy paddling rocker and wide nose for wave catching, a foiled rail and pulled in tail for responsivity.

The M2V+ is a more user friendly variation with full volume and a straighter rail. This is more of a classic minimal with added volume for extra wave catching and float. The wider tail is more stable and gives forward speed generating in smaller waves. Great for new surfers or just a fun all round board.

7'4 x 22? x 3? 56 ltr

Content: Board without fins

LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Our original M2 is the ultimate all rounder; big waves, small waves, novice or pro, anyone can have fun on this board in virtually any waves. It's a balanced design with a long easy paddling rocker and wide nose for wave catching, a foiled rail and pulled in tail for responsivity.

The M2V+ is a more user friendly variation with full volume and a straighter rail. This is more of a classic minimal with added volume for extra wave catching and float. The wider tail is more stable and gives forward speed generating in smaller waves. Great for new surfers or just a fun all round board.

7'8 x 22 1/2? x 3 3/16? * 64 ltr

Content: Board without fins

LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Our original M2 is the ultimate all rounder; big waves, small waves, novice or pro, anyone can have fun on this board in virtually any waves. It's a balanced design with a long easy paddling rocker and wide nose for wave catching, a foiled rail and pulled in tail for responsivity.

The M2V+ is a more user friendly variation with full volume and a straighter rail. This is more of a classic minimal with added volume for extra wave catching and float. The wider tail is more stable and gives forward speed generating in smaller waves. Great for new surfers or just a fun all round board.

8'0 x 22 7/8? x 3 1/4? * 68 ltr

Content: Board without fins

LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Our original M2 is the ultimate all rounder; big waves, small waves, novice or pro, anyone can have fun on this board in virtually any waves. It's a balanced design with a long easy paddling rocker and wide nose for wave catching, a foiled rail and pulled in tail for responsivity.

The M2V+ is a more user friendly variation with full volume and a straighter rail. This is more of a classic minimal with added volume for extra wave catching and float. The wider tail is more stable and gives forward speed generating in smaller waves. Great for new surfers or just a fun all round board.

7.0 x 21 1/2 x 2 7/8 - 49,5 Ltr

Content: Board without fins

LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Our original M2 is the ultimate all rounder; big waves, small waves, novice or pro, anyone can have fun on this board in virtually any waves. It's a balanced design with a long easy paddling rocker and wide nose for wave catching, a foiled rail and pulled in tail for responsivity.

The M2V+ is a more user friendly variation with full volume and a straighter rail. This is more of a classic minimal with added volume for extra wave catching and float. The wider tail is more stable and gives forward speed generating in smaller waves. Great for new surfers or just a fun all round board.

7'4 x 22? x 3? 56 ltr

Content: Board without fins

LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Our original M2 is the ultimate all rounder; big waves, small waves, novice or pro, anyone can have fun on this board in virtually any waves. It's a balanced design with a long easy paddling rocker and wide nose for wave catching, a foiled rail and pulled in tail for responsivity.

The M2V+ is a more user friendly variation with full volume and a straighter rail. This is more of a classic minimal with added volume for extra wave catching and float. The wider tail is more stable and gives forward speed generating in smaller waves. Great for new surfers or just a fun all round board.

7'8 x 22 1/2? x 3 3/16? * 64 ltr

Content: Board without fins

LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal's are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.

Our original M2 is the ultimate all rounder; big waves, small waves, novice or pro, anyone can have fun on this board in virtually any waves. It's a balanced design with a long easy paddling rocker and wide nose for wave catching, a foiled rail and pulled in tail for responsivity.

The M2V+ is a more user friendly variation with full volume and a straighter rail. This is more of a classic minimal with added volume for extra wave catching and float. The wider tail is more stable and gives forward speed generating in smaller waves. Great for new surfers or just a fun all round board.

8'0 x 22 7/8? x 3 1/4? * 68 ltr

Content: Board without fins

THIS IS THE DELUXE SURFING EXPERIENCE.
Drawing on 60 years of classic longboard design the Horseshoe is a distinguished ride. It's the luxury ocean liner, it's first class all the way.

The low rocker, wide and straight outline and 50/50 rail are combined to create a board that trims effortlessly. The wide, single concaved nose is designed to generate lift creating ample nose riding stability. In the tail, the rocker lifts slightly through the last 12? and the fin cluster is positioned slightly forward, which makes this much easier to turn than a traditional heavy noserider.

If you are looking for a classic noserider, without the weight of a traditional board, that will trim and glide, noseride easily but still turn, then this is your ride.

9.6 x 23 1/4 x 3 1/4 - 83,9 Liter Volume
1x US Base Center + 2 Futures Side Finboxes

Content of delivery: Board without fins

TORQ EPOXY COMPOSITE
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
TEC LONGBOARDS
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

The TORQ MOD Fish offers plenty of speed. It excels especially in chest to head high waves, no matter if hollow and glassy or choppy and choppy.

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

6.6 x 21 3/8 x 2 7/8
Volumen: 44 Liter
Future Finnensystem
Gewicht ohne Finnen:
Empfohlen f?r K?rpergewicht: kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

6.10 x 22 x 2 7/8
Volumen: 50 Liter
Future Finnensystem
Gewicht ohne Finnen:
Empfohlen f?r K?rpergewicht: 80-110kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

DOWNLOAD >>>> Torq Softboard Tech

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

7'2'' x 22 1/2'' x 3''
Volume: 56 Liter
Rider weight: 60-100kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Content: Board with 3 Fins

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

6.8 x 21 3/8 x 3
Volumen: 46 Liter
Future Finnensystem
Gewicht ohne Finnen:
Empfohlen f?r K?rpergewicht: kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

DOWNLOAD >>>> Torq Softboard Tech

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

7.2 x 21 5/8 x 3
Volumen: 52 Liter
Future Finnensystem
Gewicht ohne Finnen:
Empfohlen f?r K?rpergewicht: kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

DOWNLOAD >>>> Torq Softboard Tech

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

7.6 x 21 7/8 x 3 1/8
Volumen: 58 Liter
Future Finnensystem
Gewicht ohne Finnen:
Empfohlen f?r K?rpergewicht: kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.

The Volume Plus takes the trend for high volume wide boards into the Funboard model, creating a board with the stability and paddle ability of a much longer board, but in a
compact, easier to turn package. These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a
shorter boa.

Measures: 7.4 x 22 x 3
Volume: 60 Liter
For Surfers weight: 55-110kg
Finbox: 3x Futures

Content: Board with 3 fins

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.

The Volume Plus takes the trend for high volume wide boards into the Funboard model, creating a board with the stability and paddle ability of a much longer board, but in a
compact, easier to turn package. These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a
shorter brd.

Measures: 7.8 x 22 7/8 x 3 7/16
Volume: 66 Liter
For riders weight: 65-130kg
Finbox: 3x Futures

Content: Board with 3 fins

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.

The Volume Plus takes the trend for high volume wide boards into the Funboard model, creating a board with the stability and paddle ability of a much longer board, but in a
compact, easier to turn package. These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a
shorter brd.

Measures: 8.2 x 22 1/2 x 3 7/8
Volume: 70,5 Liter
For riders weight: tba kg
Finbox: 3x Futures

Content: Board with 3 fins

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

8.0 x 22 3/8 x 3 1/4
Volumen: 66 Liter
Future Finnensystem
Gewicht ohne Finnen:
Empfohlen f?r K?rpergewicht: kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

8'6 x 22 3/4? x 3 1/2?
Volumen: 71 Liter
Future Finnensystem
Empfohlen f?r K?rpergewicht: 50-80kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

9.0 x 23 1/8 x 3 1/2
Volume: 79 Liter
Future Finsystem + US Box
Rider weight: 60-90 kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Content: Board with 3 fins

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

9.1 x 23 x 3 1/4
Volume: 77 Liter
Future Finsystem + US Box
Rider weight: tba kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Content: Board with 3 fins

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

9'6 x 23 7/8? x 3 8/8?
Volumen: 95 Liter
Future Finnensystem
Empfohlen f?r K?rpergewicht: 70-140kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

6.3 x 20 7/8 x 2 3/4
Volumen: 40 Liter
Future Finnensystem
Gewicht ohne Finnen:
Empfohlen f?r K?rpergewicht: kg

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

DOWNLOAD >>>> Torq Softboard Tech

Torq soft surfboards continue the torq revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq soft technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and a layer of extruded PE Foam.
The high tech torq composite is constructed in the most advanced molds on the planet creating the most perfect reproduction every time.
Our unique combination of advanced materials, high tech construction and integrated Futures fin boxes creates a board that is both light and extraordinarily strong and durable; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

Wave Height - 2 - 6ft+
Dimensions - 5'11? x 20 3/4? x 2 3/4?
Recommended Rider Weight - 50-80kg
Volume - 37 L

Construction: Epoxy EPS Molding, PE Soft Deck, Epoxy Hard Bottom

Lieferumfang: Board mit 3 Finnen

The River Surf from Torq is a surfboard that offers high performance on indoor- pool- and river waves.
The construction is super strong, more stable than conventional boards.

5'6 x 19 3/8? x 2 1/4? - 26,4 Liters
Futures finboxes in 3-fin thruster setup

TORQ EPOXY COMPOSITE (TEC)
The torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

The TORQ MOD Fish offers plenty of speed. It excels especially in chest to head high waves, no matter if hollow and glassy or choppy and choppy.

This crossover midsize funboard serves every skill level in almost all conditions. From waist-high to over head-high. The versatility makes these boards the first choice

This crossover midsize funboard serves every skill level in almost all conditions. From waist-high to over head-high. The versatility makes these boards the first choice

This crossover midsize funboard serves every skill level in almost all conditions. From waist-high to over head-high. The versatility makes these boards the first choice

The Volume Plus (VP or V+) is a wider high volume board with the stability and paddling ability of a longer board in a compact, easy turning shape.

The Volume Plus (VP or V+) is a wider high volume board with the stability and paddling ability of a longer board in a compact, easy turning shape.

Mini Malibu longboard from relaxed gliding to radical maneuvers in powerful conditions

From relaxed gliding and noseriding to radical maneuvers in powerful conditions. The demands placed on modern longboards are diverse and the TORQ longboard design meets them all.

From relaxed gliding and noseriding to radical maneuvers in powerful conditions. The demands placed on modern longboards are diverse and the TORQ longboard design meets them all.

From relaxed gliding and noseriding to radical maneuvers in powerful conditions. The demands placed on modern longboards are diverse and the TORQ longboard design meets them all.

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 6.4 x 20 7/8 x 2 3/4 - 38.30ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

5'8 x 19 1/2? x 2 3/8? - 29,35 ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 5.8 x 19 7/8 x 2 1/4 - 28.76ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Measures: 5.10 x 20 1/8 x 2 3/8 - 31.2ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 6.0 x 20 3/8 x 2 1/2 - 33.80ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 6.2 x 20 5/8 x 2 5/8 - 36.30ltr
5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 6.4 x 20 7/8 x 2 3/4 - 38.30ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 6.8 x 20 3/4 x 2 11/16 - 39,6 ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 7.0 x 21 1/4 x 2 13/16 - 44,7 ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 7.4 x 21 3/4 x 2 7/8 - 49,4 ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

5'8 x 20 5/8? x 2 3/8? - 32,2 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

5'10 x 21? x 2 1/2? - 35,3 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

6'0 x 21 1/2? x 2 5/8? - 38,7 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

6'2 x 22? x 2 3/4? - 42,2 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

6'4 x 22 1/2? x 2 7/8? - 45,5 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

5'8 x 20 5/8? x 2 3/8? - 32,2 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

5'10 x 21? x 2 1/2? - 35,3 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

6'0 x 21 1/2? x 2 5/8? - 38,7 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

6'2 x 22? x 2 3/4? - 42,2 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 7.4 x 21 3/4 x 2 7/8 - 49,4 ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 7.0 x 21 1/4 x 2 13/16 - 44,7 ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 6.8 x 20 3/4 x 2 11/16 - 39,6 ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

5'10 x 20? x 2 1/2? - 31,95 ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'0 x 20 1/4? x 2 5/8? - 34,94 Lit
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'2 x 20 1/2? x 2 3/4? - 37,34 Ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'4 x 21? x 2 7/8? - 41,81 Ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'6 x 21 1/2? x 2 7/8? - 43,96 Ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'8 x 21 3/4? x 3? - 47,5 Ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

5'8 x 19 1/2? x 2 3/8? - 29,35 ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

5'10 x 20? x 2 1/2? - 31,95 ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'0 x 20 1/4? x 2 5/8? - 34,94 Lit
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'2 x 20 1/2? x 2 3/4? - 37,34 Ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'4 x 21? x 2 7/8? - 41,81 Ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'6 x 21 1/2? x 2 7/8? - 43,96 Ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Like it's name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.
Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It's a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days. If you're looking for a board that surfs like a shortboard without the limitations of a normal shortboard, this is for you.

With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.

6'8 x 21 3/4? x 3? - 47,5 Ltr
5 Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 5.8 x 19 7/8 x 2 1/4 - 28.76ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Measures: 5.10 x 20 1/8 x 2 3/8 - 31.2ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 6.0 x 20 3/8 x 2 1/2 - 33.80ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

Performance Thruster

The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high peformance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it!

Dim: 6.4 x 20 7/8 x 2 3/4 - 38.30ltr

5 Futures Finboxes (Thruster, Quad)

Content: Board without fins

The PG-R is a surfboard designed for performance in everyday waves.

Torq has combined the DNA of the Comp and the Summer 5 to create a board that offers the best wave catching and speed generation in weaker surf, but allows tight arcing turns and vertical surfing.

The PG-R features a low entry rocker, wide 12 inch mark and concave in the front half which enables this board to plane easily and generate speed in weaker surf. From the mid-point to the tail, the outline curves to a more normal shortboard squash tail, with a single to double concave and a vee through the fins allowing easy rail to rail transitions.

The result is a board that will accelerate fast and transfer all the speed into powerful turns and above the lip projection.

With 5 Futures fin boxes, the PG-R can be ridden as Quad or Thruster.

6'4 x 22 1/2? x 2 7/8? - 45,5 Lit

Content: Board without fins
Futures Finboxes

TORQ EPOXY COMPOSITE
The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.

Torq surfboards represent a revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and our unique Shield Skin The high tech torq composite is constructed in the most advanced molds on the planet – precision CNC cut from a single aluminium block – creating the most perfect reproduction every time.
Our unique combination of advanced materials and high tech construction creates a board that performs at a high level – offering lightweight shapes with responsive flex – but also offers extraordinary durability and strength; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

9'0'' Long – 9'0'' x 22 ?'' x 3 1/8''
Volume 72 Lit
Construction: Epoxy EPS Moulding

Characteristics:
Classic Longboard style or progressive surfing, the torq 9'0'' will bring you the full experience of surfing. From 1ft surf to solid swell. This 9'0'' Longboard makes surfing effortless.

Outline:
A modern longboard outline. A squash tail and a full nose template complete the flowing outline curves.

Fin Setup:
1 US Center Fin box + 2 Side Fin Futures box – 2+1
1 x 8'' Center Fin + 2 x Sidebite Futures Template SB1

Bottom Shape:
Slight single concave entry, blending into a V with a slight double concave carrying all the way through to the tail.

Rocker:
A low entry rocker that's supported by a slight nose lift, combined with a fast midsection with enough tail release to keep the board fast and loose.

Torq surfboards represent a revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and our unique Shield Skin The high tech torq composite is constructed in the most advanced molds on the planet – precision CNC cut from a single aluminium block – creating the most perfect reproduction every time.
Our unique combination of advanced materials and high tech construction creates a board that performs at a high level – offering lightweight shapes with responsive flex – but also offers extraordinary durability and strength; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

Level - 2 > Expert
Wave Height - 2 - 6ft+
Dimensions - 5'11? x 20 3/8? x 2 1/2?
Recommended Rider Weight - 35-65kg / 80-130 lbs
Volume - 33.2 L

Construction: Epoxy EPS Moulding

Characteristics:
The best characteristics of modern performance fish design blended into one board; wide and stable for paddling and catching waves, but featuring our V-twin bottom shape to help you get the most from your surfing.
Ride it as a Quad or Thruster and explore your possibilities.

Outline:
This modern fish is built for speed – a full nose and wide mid point, with clean balanced curves leading into a wide, full throttle swallow tail.

Fin Setup:
5 Fin Futures box set up – Thruster or Quad
3 Fins supplied– Futures template F6

Bottom Shape:
A single concave entry, blending into a V with a slight double concave running all the way out through the tail. We call it the V-Twin; maximum acceleration and rail hold.

Rocker:
Slightly flipped nose combined with a quick entry, a fast midsection and release off the tail.

Torq surfboards represent a revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and our unique Shield Skin The high tech torq composite is constructed in the most advanced molds on the planet – precision CNC cut from a single aluminium block – creating the most perfect reproduction every time.
Our unique combination of advanced materials and high tech construction creates a board that performs at a high level – offering lightweight shapes with responsive flex – but also offers extraordinary durability and strength; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

6?3?? Fish – 6?3?? x 20 ??? x 2 ?''

190,5 x 52,07 x 6,35 – Volume 36 liters
Weight without fins: 3,8 kg +/- 5%

Construction: Epoxy EPS Moulding

Characteristics:
The best characteristics of modern performance fish design blended into one board; wide and stable for paddling and catching waves, but featuring our V-twin bottom shape to help you get the most from your surfing.
Ride it as a Quad or Thruster and explore your possibilities.

Outline:
This modern fish is built for speed – a full nose and wide mid point, with clean balanced curves leading into a wide, full throttle swallow tail.

Fin Setup:
5 Fin Futures box set up – Thruster or Quad
3 Fins supplied– Futures template F6

Bottom Shape:
A single concave entry, blending into a V with a slight double concave running all the way out through the tail. We call it the V-Twin; maximum acceleration and rail hold.

Rocker:
Slightly flipped nose combined with a quick entry, a fast midsection and release off the tail.

Torq surfboards represent a revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and our unique Shield Skin The high tech torq composite is constructed in the most advanced molds on the planet – precision CNC cut from a single aluminium block – creating the most perfect reproduction every time.
Our unique combination of advanced materials and high tech construction creates a board that performs at a high level – offering lightweight shapes with responsive flex – but also offers extraordinary durability and strength; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

6'6'' Fish – 6'6'' x 21'' x 2 5/8''
198,12 x 53,34 x 6,67 – Volume 40 liters


Construction: Epoxy EPS Moulding

Characteristics:
First time short boarders or lighter beginners will enjoy this progressive modern shape.
Just catching waves or improving your turns the torq 6'6'' will help you to enjoy your surfing more.

Tune this Fish to your personal skills. Ride it as a Quad or Thruster.

Outline:
A fine-tuned modern fish design with a full nose and wide mid point, clean balanced curves lead into a wide swallow tail.

Fin Setup:
5 Fin Futures box set up – Thruster or Quad
3 Fins – Futures template F6

Bottom Shape:
A single concave entry, blending into a V with a slight double concave running all the way out through the tail. We call it the V-Twin; maximum acceleration and rail hold.

Rocker:
Slightly flipped nose combined with a quick entry, a fast midsection and release of the tail.

Torq surfboards represent a revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the torq technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and our unique Shield Skin The high tech torq composite is constructed in the most advanced molds on the planet – precision CNC cut from a single aluminium block – creating the most perfect reproduction every time.
Our unique combination of advanced materials and high tech construction creates a board that performs at a high level – offering lightweight shapes with responsive flex – but also offers extraordinary durability and strength; ensuring your new torq surfboard will keep you stoked from your first wave to your last.

Level - 2 > Expert
Wave Height - 2 - 6 ft+
Dimensions - 6'10? x 21 3/4? x 2 3/4?
Recommended Rider Weight - 60-90kg / 130-200 lbs
Volume - 46.0 l

Construction: Epoxy EPS Moulding

Characteristics:
The best characteristics of modern performance fish design blended into one board; wide and stable for paddling and catching waves, but featuring our V-twin bottom shape to help you get the most from your surfing.
Ride it as a Quad or Thruster and explore your possibilities.

Outline:
This modern fish is built for speed – a full nose and wide mid point, with clean balanced curves leading into a wide, full throttle swallow tail.

Fin Setup:
5 Fin Futures box set up – Thruster or Quad
3 Fins supplied– Futures template F6

Bottom Shape:
A single concave entry, blending into a V with a slight double concave running all the way out through the tail. We call it the V-Twin; maximum acceleration and rail hold.

Rocker:
Slightly flipped nose combined with a quick entry, a fast midsection and release off the tail.

Torq pr?sentiert die Revolution in der Epoxy Surfboard Technologie. Verwendet werden nur die neusten EPS und Epoxy Materialien. Die Torq Technologie kombiniert superleichte EPS Kerne mit biaxialem Glasfasergewebe und hochwertigem Epoxy Harz, sowie einer „Shield Skin" Au?enh?lle zum Schutz des Boards vor Kratzern und ?u?eren Besch?digungen.

Torq Surfboards sind weltweit die einzigen Boards, die in Hochpr?zisionsformen, die per CNC Fr?sung aus einem St?ck eines Aluminium Blocks gefr?st wurden, hergestellt werden. Sie erreichen dadurch eine immer gleichbleibende Qualit?t und ein unvergleichbares Finish vom ersten bis zum letzten Board.

Torq?s einzigartige Kombination aus hochentwickelten Materialien und Hochtechnologie Bauweise liefert ein Surfboard das Performance auf einem ?u?erst hohen Level bietet. Das Ergebnis: Superleichte Shapes mit lebendigem Flex, die aber gleichzeitig auch super robust und haltbar sind. Dein neues Torq Board wird Dich begeistern – von Deiner ersten Welle bis zur letzten!

7'2'' x 22 1/2'' x 3''
Volume: 53 Liter
Gewicht ohne Finnen:
Empfohlen f?r K?rpergewicht: 60-100kg

Construction: Epoxy EPS Moulding
Finnensystem: Futures

Lieferumfang: Board mit 3 Finnen

Characteristics:
With a shape that's more today than yesterday, our modern "fish? design is built for speed. Excelling in chest to overhead high waves, it performs on those hollow, glassy days, yet enjoys mushy, sloppy and less than perfect conditions too. The wide template also suits heavier surfers looking for a performance feel.

Tune this Fish to your personal skills. Ride it as a Quad or Thruster.

Outline:
Comprised of a full nose and wide mid, with clean balanced curves that blend into a swallow tail. The bottom contours through single to double concave with a lightly flipped nose.

Fin Setup:
5 Fin Futures box set up – Thruster or Quad
3 Fins – Futures template F6

Bottom Shape:
A single concave entry, blending into a V with a slight double concave running all the way out through the tail. We call it the V-Twin; maximum acceleration and rail hold.

Rocker:
Slightly flipped nose combined with a quick entry, a fast midsection and release of the tail.